Lenovo ThinkServer TD230 - Installing the Microprocessor

Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheremovalprocedure,goto“Completingthepartsreplacement”onpage90.
Installingthemicroprocessor
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage21
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
Thissectionprovidesinstructionsonhowtoinstallthemicroprocessor.
CAUTION:
Theheatsinkandmicroprocessormightbeveryhot.Turnofftheserverandwaitthreeto
veminutestolettheservercoolbeforeremovingtheservercover.
Foroptimalperformance,followthesemicroprocessorinstallationrules:
1.Whentwomicroprocessorsareinstalled,bothmusthavethesamecorevoltageandcorespeed.
2.Whenonlyonemicroprocessorisinstalled,itmustbeinthemicroprocessor1socket.Theother
socketmustbeempty.
3.Alwaysinstallthemicroprocessorrstintothemicroprocessor1socket,andtheninstallanother
microprocessorintothemicroprocessor2socketifyouwanttoinstalltwomicroprocessors.
Toinstallthemicroprocessor,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage23.
3.Laytheserveronitssideforeasieroperation.
4.Removetheheatsinkandfanassemblyifnecessary.See“Removingtheheatsinkandfanassembly”
onpage71
.
5.Pressdownandgentlypushthesmallhandlealittlebitoutwardonthemicroprocessorsockettoliftthe
handletotheopenposition.
Figure68.Liftingthehandle
Chapter5.Installing,removing,orreplacinghardware87