Lenovo ThinkServer TD230 - Removing a Non-Hot-Swap Hard Disk Drive

Removinganon-hot-swapharddiskdrive
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage21
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
Thissectionprovidesinstructionsonhowtoremoveanon-hot-swapharddiskdrive.Thissectionapplies
onlytoservermodelsthathavenon-hot-swapharddiskdrivesinstalled.
Attention:Tomaintainpropersystemcooling,donotoperatetheserverformorethan10minuteswithout
eitheradriveorallerpanelinstalledineachdrivebay.
Toremoveanon-hot-swapharddiskdrive,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Pressthebluebutton1toopenthesidedoor.
Note:Ifyouhavelockedthesidedoor,youmustturnofftheserver,disconnectallpowercords,and
removetheservercoverwhenyouwanttoremove,install,orreplaceanyharddiskdrives.See“Locking
orunlockingtheharddiskdrivesidedoor”onpage26and“Removingtheservercover”onpage23.
Figure35.Openingthesidedoor
Chapter5.Installing,removing,orreplacinghardware47