Lenovo ThinkServer TD230 - Using Passwords

Table22.ItemsundertheServerManagementmenu(continued)
ItemOptionDescription
FRB-2Enable
[Enabled]/Disabled
OSBootWatchdogTimer[Disabled]/Enabled
OSBootWatchdogTimerPolicy[PowerOff]Default.Cannotbemodied.
OSBootWatchdogTimerTimeout[10minutes]Default.Cannotbemodied.
Plug&PlayBMCDetection[Disabled]/Enabled
ACPI1.0Support[Disabled]/Enabled
ConsoleRedirection[Disabled]/SerialPortA/SerialPort
B
SystemInformation
Viewthesysteminformation.
BaseboardLANcongurationUsethisoptiontocongurethe
BaseboardLAN.
Intel(R)RMM3LANconguration
Usethisoptiontocongurethe
RMM3LAN.
BMCLANConguration
UsercongurationUsethisoptiontoconguretheuser
IDandpassword.
Note:Thesettingsin[]arethedefaultsettingsintheSetupUtilityprogram.
Table23.ItemsundertheBootOptionsmenu
ItemOption
SystemBootTimeout[0]
BootOption#1
Usethisoptiontosettherstbootdevice.
BootOption#2
Usethisoptiontosetthesecondbootdevice.
BootOption#3
Usethisoptiontosetthethirdbootdevice.
BootOption#4
Usethisoptiontosetthefourthbootdevice.
NetworkDeviceOrder
Usethisoptiontosetthenetworkdevicebootsequence.
DeleteBootOption
Deletebootoptions.
EFIOptimizedBoot[Disabled]/Enabled
BootOptionRetry[Disabled]/Enabled
Note:Thesettingsin[]arethedefaultsettingsintheSetupUtilityprogram.
ExitingtheSetupUtilityprogram
Afteryounishviewingorchangingsettings,pressEsctoreturntotheSetupUtilityprogrammainmenu.
YoumighthavetopressEscseveraltimes.Then,youcandooneofthefollowing:
•IfyouwanttosavethenewsettingsandexittheSetupUtilityprogram,pressF10.Otherwise,your
changeswillnotbesaved.
•Ifyoudonotwanttosavethenewsettings,selectExit➙DiscardChangesandExit.
•Ifyouwanttoreturntothedefaultsettings,pressF9orselectExit➙LoadDefaultValues.
Usingpasswords
ByusingtheSetupUtilityprogram,youcansetapasswordtopreventunauthorizedaccesstoyourserver
anddata.Thefollowingoptionsareavailabletohelpyousetanadministratorpasswordorauserpassword:
Chapter6.Conguringtheserver101