Lenovo ThinkServer TD230 - Page 71

5.LocatetheSATAkeyconnectoronthesystemboard.See“Locatingpartsonthesystemboard”on
page15.Then,installtheRAID5keyintotheSATAkeyconnector.
Figure46.InstallingtheRAID5key
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage90
.Then,refertoChapter
6“Conguringtheserver”onpage95forinformationaboutRAIDconguration.
RemovingtheRAID5key
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage21
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
ThissectionprovidesinstructionsonhowtoremovetheRAID5keyfromthesystemboard.Ifyouremove
theRAID5key,theRAID5congurationfunctionoftheonboardSATARAIDbecomesunavailable.However,
theRAID5congurationfunctionoftheThinkServer9240-8iRAID0/1Adapterisstillavailableifyouhave
installedtheThinkServer9240-8iRAID5UpgradeKeyontheadapter.See“Installingthe9240-8iRAID5
key”onpage60
.
ToremovetheRAID5key,dothefollowing:
Attention:Electrostaticdischarge(ESD)candamagetheRAID5key.Alwaysgroundyourselfandusea
groundstrapbeforetouchingtheoption.PerformthefollowingprocedureatanESD-safeworkstation.
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage23.
3.Laytheserveronitssideforeasieroperation.
Chapter5.Installing,removing,orreplacinghardware59