Lenovo ThinkServer TD230 - Page 73

2.Removetheservercover.See“Removingtheservercover”onpage23.
3.Laytheserveronitssideforeasieroperation.
4.Touchthestatic-protectivepackagethatcontainsthe9240-8iRAID5keytoanyunpaintedsurfaceon
theoutsideoftheserver.Then,removethe9240-8iRAID5keyfromthepackage.
5.Installthe9240-8iRAID5keytotheThinkServer9240-8iRAID0/1Adapter,asshown:
Figure48.Installingthe9240-8iRAID5key
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage90.Then,refertoChapter
6“Conguringtheserver”onpage95forinformationaboutRAIDconguration.
Removingthe9240-8iRAID5key
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage21.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
Thissectionprovidesinstructionsonhowtoremovethe9240-8iRAID5keyfromtheThinkServer9240-8i
RAID0/1Adapter.Ifyouremovethe9240-8iRAID5key,theRAID5congurationfunctionofthe
ThinkServer9240-8iRAID0/1Adapterbecomesunavailable.However,theRAID5congurationfunction
oftheonboardSATARAIDisstillavailableifyouhaveinstalledtheRAID5Keyonthesystemboard.See
“InstallingtheRAID5key”onpage58
.
Toremovethe9240-8iRAID5key,dothefollowing:
Attention:Electrostaticdischarge(ESD)candamagethe9240-8iRAID5key.Alwaysgroundyourselfand
useagroundstrapbeforetouchingtheoption.PerformthefollowingprocedureatanESD-safeworkstation.
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage23.
3.Laytheserveronitssideforeasieroperation.
Chapter5.Installing,removing,orreplacinghardware61