4.Installthefrontfanbyaligningthefourrubbermountswiththecorrespondingholesinthechassis,and
thenpushtherubbermountsthroughtheholes.
Notes:
a.Thenewfrontfanwillhavefournewrubbermountsattached.
b.Iftwomicroprocessorsareinstalledinyourserver,youcaninstalltwofrontfans,onefor
microprocessor1andtheotherformicroprocessor2.
c.Youmightalsoneedtopulltherubbermountsthroughtheholesfromtheothersidetosecure
thefrontfaninplace.
Figure64.Installingthefrontfan
5.Connectthefrontfancabletothecorrespondingfrontfanconnectoronthesystemboard.See
“Locatingpartsonthesystemboard”onpage15.
6.Reinstallallharddiskdrives.See“Installingahot-swapharddiskdrive”onpage41or“Installinga
non-hot-swapharddiskdrive”onpage49.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage90
.
Chapter5.Installing,removing,orreplacinghardware81
To Next Page
Loading...
