Figure 29. 3.5-inch simple-swap drive model with software RAID
Table 17. 3.5-inch simple-swap drive model with software RAID
1 Backplane power connector
3.5-inch simple-swap drive model with hardware RAID
If you are implementing RAID through hardware, route the signal cable and the power cable as shown in the
following illustration.
Table 18. Backplates for RAID x30 / x40 adapter
For RAID x30 adapter: For RAID x40 adapter:
4 x 3.5'' simple-swap backplate, miniSAS HD to SAS 4 x 3.5'' simple-swap backplate, slimSAS HD to SAS
30 ThinkSystem SR250 Setup Guide
To Next Page
Loading...
