Table 24. Signal cables for RAID x30 / x40 adapter routing
For RAID x30 adapter: For RAID x40 adapter:
1 mini SAS HD cable, 450 mm 1 slimSAS HD to mini SAS cable, 450 mm
2 slimSAS to mini SAS cable, 450/500 mm
Figure 34. Eight 2.5-inch hot-swap drive model with hardware RAID
Table 25. Eight 2.5-inch hot-swap drive model with hardware RAID
1 Backplane power connector 2 RAID adapter connector
• Connect to RAID x30 adapter: C0, C1
• Connect to RAID x40 adapter: C0
Ten 2.5-inch hot-swap drive model
Use this section to understand how to route cables for the ten 2.5-inch hot-swap drive model.
Ten 2.5-inch hot-swap drive model with hardware RAID
If you are implementing RAID through hardware, route the SAS cables and power cables as shown in the
following illustration.
Chapter 2. Server components 35
To Next Page
Loading...
