Figure 31. Four 3.5-inch hot-swap drive model with software RAID
Table 20. Four 3.5-inch hot-swap drive model with software RAID
1 Backplane power connector
Four 3.5-inch hot-swap drive model with hardware RAID
If you are implementing RAID through hardware, route the signal cable and the power cable as shown in the
following illustration.
Table 21. Signal cables for RAID x30 / x40 adapter routing
For RAID x30 adapter: For RAID x40 adapter:
1 mini SAS HD cable, 450 mm 1 slimSAS HD to mini SAS cable, 450 mm
2 slimSAS to mini SAS cable, 450/500 mm
32 ThinkSystem SR250 Setup Guide
To Next Page
Loading...
