Lenovo ThinkSystem SR250 - Page 44

Table 29. Parts list - 2.5-inch drive model
Index Description
Tier 1 CRU Tier 2 CRU
FRU
Consuma-
ble and
Structural
part
For more information about ordering the parts shown in Figure 37 “Server components - 2.5-inch drive model” on
page 39:
http://datacentersupport.lenovo.com/us/en/products/servers/thinksystem/sr250/7Y51/parts
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner
before purchasing any new parts.
1
Top cover
√
2
PCIe riser assembly
√
3
SATA/SAS RAID adapter (8i)
√
4
SATA/SAS RAID adapter (16i)
√
5
PCIe switch card
√
6
Air baffle
√
7
Fan
√
8
TPM card
√
9
CMOS battery (CR2032)
√
10
System board
√
11
Fixed power supply unit
√
12
Redundant power supply unit
√
13
Chassis for the redundant power supply
√
14
Front I/O assembly
√
15
VGA cable
√
16
2.5-inch hot-swap drive
√
17
Drive filler
√
18
Chassis for the fixed power supply
√
19
Power interface board
√
20
Flash power module
√
21
M.2 drives (42 mm and 80mm)
√
22
DIMM
√
23
Processor
√
24
Heat sink
√
25
Backplane, eight 2.5-inch hot-swap drives
√
26
Backplane, ten 2.5-inch hot-swap drives
√
40 ThinkSystem SR250 Setup Guide