Lenovo ThinkSystem SR250 - Page 47

Table 30. Parts listing - 3.5-inch drive model
Index Description
Tier 1 CRU Tier 2 CRU
FRU
Consuma-
ble and
Structural
part
For more information about ordering the parts shown in Figure 38 “Server components - 3.5-inch drive model” on
page 42:
http://datacentersupport.lenovo.com/us/en/products/servers/thinksystem/sr250/7Y51/parts
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner
before purchasing any new parts.
1
Top cover
√
2
PCIe riser assembly
√
3
SATA/SAS RAID adapter (8i)
√
4
SATA/SAS RAID adapter (16i)
√
5
PCIe switch card
√
6
Air baffle
√
7
Fan
√
8
TPM card
√
9
CMOS battery (CR2032)
√
10
System board
√
11
Fixed power supply unit
√
12
Redundant power supply unit
√
13
Chassis for the redundant power supply
√
14
Front operator panel
√
15
VGA cable
√
16
3.5-inch hot-swap drive
√
17
3.5-inch simple-swap drive
√
18
2.5-inch simple-swap drive with 3.5-inch drive
tray
√
19
Chassis for the fixed power supply
√
20
Power interface board
√
21
Flash power module
√
22
M.2 drives (42 mm and 80mm)
√
23
DIMM
√
24
Processor
√
25
Heat sink
√
26
Backplane, four 3.5-inch hot-swap drives
√
Chapter 2. Server components 43