Lenovo ThinkSystem SR250 - Page 88

Tool
Update
Methods
Suppor-
ted
Core
System
Firmware
Updates
I/O
Devices
Firm-
ware
Updates
Graphi-
cal user
interface
Com-
mand
line
interface
Supports
UXSPs
Lenovo XClarity Integrator (LXCI) for
VMware vCenter
Out-of-
band
Off-
Target
√
Selected
I/O
devices
√
Lenovo XClarity Integrator (LXCI) for
Microsoft Windows Admin Center
In-band
Out-of-
band
On-
Target
Off-
Target
√
All I/O
devices
√ √
Lenovo XClarity Integrator (LXCI) for
Microsoft System Center Configuration
Manager
In-band
On-
Target
√
All I/O
devices
√ √
Notes:
1. For I/O firmware updates.
2. For BMC and UEFI firmware updates.
• Lenovo XClarity Provisioning Manager
From Lenovo XClarity Provisioning Manager, you can update the Lenovo XClarity Controller firmware, the
UEFI firmware, and the Lenovo XClarity Provisioning Manager software.
Note: By default, the Lenovo XClarity Provisioning Manager Graphical User Interface is displayed when
you press F1. If you have changed that default to be the text-based system setup, you can bring up the
Graphical User Interface from the text-based system setup interface.
Additional information about using Lenovo XClarity Provisioning Manager to update firmware, see:
“Firmware Update” section in the LXPM documentation compatible with your server at
https://
sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html
• Lenovo XClarity Controller
If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific
server.
Notes:
– To perform an in-band update through Windows or Linux, the operating system driver must be installed
and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.
Additional information about configuring Ethernet over USB, see:
“Configuring Ethernet over USB” section in the XCC documentation version compatible with your
server at
https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html
84 ThinkSystem SR250 Setup Guide