3
Electrical installation
Wiring of terminal strips
EDK82EV113 DE/EN/FR 8.1
L
96
The enclosed terminal strips are tested according to the specifications of the
l DIN VDE 0627:1986−06 (partially)
l DIN EN 60999:1994−04 (partially)
Checked and tested are, for instance, mechanical, electrical and thermal load, vibration,
damage of conductors, loose conductors, corrosion, ageing.
( Stop!
Proceed as follows to avoid damage of the contacts:
l Mount only when the controller is not connected to the mains.
l Wire the terminal strips before connecting them!
l Unused terminal strips must also be plugged in to protect the contacts.
8200vec015
) Note!
Wiring without wire end ferrules is always possible.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
