Lenze 8200 - motec assembly

motec assembly

15
MA8200MOT DE/EN/FR 3.0
Please observe the following before motec assembly:
0
motec with function module (X3):
Remove and keep the protection cover of the function module and the jumper protection cover
before assembly.
Otherwise, the motec might be damaged!
1
motec without function module (X3):
The jumper protection cover must be plugged on. Otherwise, the motec is not ready for
operation!
8200mot059
B
A
8200mot060
2.4 Nm
21 lbin
S
Standard-I/O
2
2
Before commissioning the motec with function module (X3):
Complete the motec nameplate with the sticker that is delivered together with the function module.
Show/Hide Bookmarks