Product description
Device features
3
16
EDS84ABD302 EN 4.0
3 Product description
3.1 Device features
Features
Version
BaseLine D BaseLine C
Power range: 250 W to 3.0 kW 9 9
Integrated interference suppression according to
EN 61800-3
9 9
Dynamic brake transistor integrated in devices
with 400 V mains connection
9 9
Integrated shield terminal for safe installation of
the control cables
9 9
Identical connection system for the c ontrol cables
in the entire power range
9 9
System bus connection (CANopen) - 9
Memory module for quick commissioning and
easy service
9 9
Interface for diagnostics and parameter settings,
also during operation
9 9
Automatic motor identification for optimum
operational performance
9 9
I
2
t motor monitoring 9 9
Flying restart circuit for quick and jerk-free flying
restart on the motor
9 9
DC-current braking function 9 9
Freely configurable user m enu 9 9
Operating modes:
– VFCplus: V/F open loop, linear and
square-law
– SLVC: Sensorless vector control (speed)
9 9
S ramps for jerk-free acceleration and
deceleration
9 9
As option, DC bus terminal:
z to connect devices operating at 230 V to:
– an external brake module and/or
–aDCbussystemor
– DC supply (only with devices in the power
range 0.25 ... 1.5 kW)
z to connect devices operating at 400 V to:
– an external brake resistor and/or
– a DC source or a DC bus system, or
– DC supply (with devices in the power range
0.37 ... 3 kW)
9 9
Note!
When the device is operated from a DC source:
ƒ the internal RFI filter is not active.
ƒ thedeviceisnotULrated.
To Next Page
Loading...
