Commissioning
Test commissioning
7
87
EDS84ABD302 EN 4.0
7.5 Test commissioning
Danger!
The controller is a source of danger which may lead to death or severe injury
of persons.
To protect yourself and others against these dangers, observe the safety
instructions before switching on the controller.
Please read the safety instructions provided in the 8400 Mounting Instructions
and i n the 8400 Hardware Manual. Both documents are supplied with the
controller.
Target
For test and demonstration purposes, the motor shall be rotated in best time with as few
wiring complexity and settings.
Keypad or setpoint potentiometer
First decide how to control the controller during test commissioning:
ƒ Test commissioning with keypad control
ƒ Test commissioning with terminal control
Tip!
The use of the internal keypad is described in the corresponding software
manual and in the hardware manual. The electronic version of the manuals
can be found on the ”L-force 8400 Inverter Drives” CD.
To Next Page
Loading...
