Lenze 8400 motec - Conventions used

Lenze · Decentralised frequency inverter 8400 motec (AS-Interface option) · EDS84DMOTASI EN 4.0 - 09/2013 11
Safety instructions
Device and application-specific safety instructions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2.2 Device and application-specific safety instructions
• During operation, the Communication Unit must be connected to the Wiring Unit and the Drive
Unit.
• Only use cables that comply with the listed specifications.
Bus cable specification
( 21)
2.3 Residual hazards
Device protection
• The communication unit contains electronic components that can be damaged or destroyed by
electrostatic discharge.
Installation
( 19)
 Documentation of "Inverter Drives 8400 motec", control system, plant/machine
All other measures prescribed in this documentation must also be implemented.
Observe the safety instructions and application notes specified in the documentation.