Lenze 8400 motec - All Parameters for Setting the AS-I Communication

Lenze · Decentralised frequency inverter 8400 motec (AS-Interface option) · EDS84DMOTASI EN 4.0 - 09/2013 27
Commissioning
Settings for AS-i communication in the »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3.2 All parameters for setting the AS-i communication
All parameters for setting the AS-i communication can be found in the »Engineer« on the "All
parameters" tab.
Save the changed settings with the device command C00002/11 (save all parameter sets).
Addressing the AS-i slaves
( 26)
Parameters relevant for AS-i communication
( 61)