Configuration
Code table
8
8.5
8.5−16
EDSVF9383V EN 4.0−03/2006
IMPORTANTPossible settingsCode
SelectionLenzeNameNo.
C0168 Display of the fault messages in
the history buffer
l Keypad: LECOM error number
See System
Manual
(extension)
1 Fail no. act Active fault
2 Fail no. old1 Last fault
3 Fail no. old2 Second to last fault
4 Fail no. old3 Third last fault
5 Fail no. old4 Fourth−last fault
6 Fail no. old5 Fifth−last fault
7 Fail no. old6 Sixth−last fault
8 Fail no. old7 Last but six fault
C0169
Display in [s]
Displays at what time the fault
(C0168) has occurred since mains
connection (C0179)
l If a fault is followed by another
fault for several times, only the
time of the last occurrence is
stored
1 Failtime act Active fault
2 Failtime old1 Last fault
3 Failtime old2 Second to last fault
4 Failtime old3 Third last fault
5 Failtime old4 Fourth−last fault
6 Failtime old5 Fifth−last fault
7 Failtime old6 Sixth−last fault
8 Failtime old7 Last but six fault
C0170 Displays how many times the
fault (C0168) has occurred after
the last mains connection
1 Counter act Active fault
2 Counter old1 Last fault
3 Counter old2 Second to last fault
4 Counter old3 Third last fault
5 Counter old4 Fourth−last fault
6 Counter old5 Fifth−last fault
7 Counter old6 Sixth−last fault
8 Counter old7 Last but six fault
To Next Page
Loading...
