Configuration
Code table
8
8.5
8.5−25
EDSVF9383V EN 4.0−03/2006
IMPORTANTPossible settingsCode
SelectionLenzeNameNo.
C0368 Sync Tx ID 128 1 {1} 256 Transmission identifier (Tx)
l Identifier for generating a sync
telegram
C0369 Sync Tx Time 0 0 {1} 65000 Sync transmission time (Tx)
l Transmission interval for the
object set in C0368
C0400 DIS: OUT −199.99 {0.01 %} 199.99 Analog output signal, function
block AIN1
l Read only
See System
Manual
(extension)
C0402
CFG: OFFSET 19502 FCODE−26/1 Selection list 1 Configuration offset, function
block AIN1
l The offset is added to the input
signal at AIN1−IN
C0403
CFG: GAIN 19504 FCODE−27/1 Selection list 1 Configuration of gain, function
block AIN1
l The gain is multiplied by the
input signal at AIN1−IN
C0404 −199.99 {0.01 %} 199.99
Function block AIN1
l Display of the signals linked in
C0402 and C0404
1 DIS: OFFSET
2 DIS: GAIN
C0405 DIS: OUT −199.99 {0.01 %} 199.99 Analog output signal, function
block AIN2
l Read only
See System
Manual
(extension)
C0407
CFG: OFFSET 19503 FCODE−26/2 Selection list 1 Configuration of offset, function
block AIN2
l The offset is added to the input
signal at AIN2−IN
C0408
CFG: GAIN 19505 FCODE−27/2 Selection list 1 Configuration of gain, function
block AIN2
l The gain is multiplied by the
input signal at AIN2−IN
C0409 −199.99 {0.01 %} 199.99
Function block AIN2
l Display of the signals linked in
C0407 and C0408
1 DIS: OFFSET
2 DIS: GAIN
C0420
Encoder const 512 1 {1 inc/rev} 8192 Number of increments for
incremental encoder at X8 or X9
l Connect incremental encoders
with HTL−level on X9 only
6.7−1
C0421
Enc voltage 5.00 5.00 {0.1 V} 8.00 Supply voltage for the incremental
encoder at X8
CAUTION! A wrong entry can
destroy the incremental encoder!
To Next Page
Loading...
