Lenze E84DGFCG Series - Page 90

Lenze · Decentralised frequency inverter 8400 motec (EtherNet/IP™ option) · EDS84DMOTEIP EN 2.0 - 10/2013 90
Error messages
Mapping of Lenze device errors to DRIVECOM errors
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
EtherNet/IP error messages
Lenze error DRIVECOM error
Error number
[32 bits]
Error message Error number
[hex]
Error message
xx.0444.12544
EtherNet/IP: Exist. connect. to 8400 lost 0x7510 Serial Interface No 1
xx.0444.21809
EtherNet/IP: Memory: No Access 0x7600 Data memory
xx.0444.21810
EtherNet/IP: Memory: Read Error 0x7600 Data memory
xx.0444.21811
EtherNet/IP: Memory: Write Error 0x7600 Data memory
xx.0444.24592
EtherNet/IP: Restart by Watchdogreset 0x6010 Software reset (watchdog)
xx.0444.24593
EtherNet/IP: Internal Error 0x6100 Internal software
xx.0444.24832
EtherNet/IP: Internal Error 0x6100 Internal software
xx.0444.24833
EtherNet/IP: Internal Error 0x6100 Internal software
xx.0444.25631
EtherNet/IP: Invalid Parameter Set 0x7421 Invalid Parameters
xx.0444.25632
EtherNet/IP: Error: Lenze Setting Loaded 0x7421 Invalid Parameters
xx.0444.25648
EtherNet/IP: Invalid Configuration 0x7421 Invalid Parameters
xx.0444.25907
EtherNet/IP: Invalid IP Parameter 0x7421 Invalid Parameters
xx.0444.33041
EtherNet/IP: Fault Mode 0x7000 Additional Modules
xx.0444.33042
EtherNet/IP: Explicit Message Timeout 0x7500 Communication
xx.0444.33044
EtherNet/IP: Overall Ethernet Timeout 0x7500 Communication
xx.0444.33074
EtherNet/IP: Idle Mode 0x7000 Additional Modules
xx.0444.33395
EtherNet/IP: Duplicate IP Address 0x7421 Invalid Parameters