Lenze i550 Series - Ethernet;Ip

EtherNet/IP
Status displays at the RJ45 sockets
The LEDs at the RJ45 sockets indicate the connecon status to the network:
LED "Link" (green) Status/meaning
o No connecon to the network.
on
A physical connecon to the network is available.
LED "Acvity" (yellow) Status/meaning
o No data transfer.
on or ickers
Data is exchanged via the network.
Typical topologies
Line Tree Ring
S
R
An
A2A1
S
SWn
SW2
SW1
S
An
A2
A1
A3
DLR
S Scanner SW Switch
A Adapter
Basic network sengs
The rotary encoder switch allows you to set the last byte of the IP address.
x16 x1
Seng Value of last byte Resulng IP address
0x00 Value from parameter Value from parameter
0x01 ... 0xFE Switch posion 192.168.124.<switch posion>
0xFF Default seng 192.168.124.16
Electrical installaon
Networks
EtherNet/IP
91