Mechanical installation
Important notes
5
l
23
LDEDS−CCU210B EN 4.0
5 Mechanical installation
5.1 Important notes
ƒ Never install or commission damaged products. Please complain about damage
immediately to the forwarder.
ƒ Only mount the control system if the data on the nameplate of the control system
correspond to the voltage mains.
ƒ Ensure that the mounting location fulfils the following conditions:
– The ambient conditions mentioned in the technical data have to be fulfilled.
– No oils, acids, gases, vapours, radiation, etc.
– Protection against the permeation of fluid.
– Low−vibration and buckling resistant substructure.
To Next Page
Loading...