Function library
Infrared remote control (IrRC)
8
l
68
LDEDS−CCU210B EN 4.0
8.9 Infrared remote control (IrRC)
Via the infrared remote control you can operate the vehicle control system in manual
operation.
In C0480 you configure the change−over to the manual infrared operation via the key
[green].
You exit the manual infrared operation by pressing the key [red] or by pressing the On/Off
switch.
) Note!
The manual infrared operation is not reset by mains switching.
In the manual infrared operation the following functions are provided:
Key Function Comment
0 Acknowledge error An error can also be acknowledged in automatic operation
by the key [0]:
For this, press the key [0] for approx. 1.5 seconds.
1 V1
Activation of the motor with clockwise rotating field and Vx
2 V2
3 V3
4 V4
5 V5
6 V6
7 V1
Activation of the motor with anti−clockwise rotating field
and Vx
8 V2
9 V3
F4 Open brake
To Next Page
Loading...