Lenze SX-1 - Program Entry Completion and Saving

8.3
Completion of Program Entry
1. After the last instruction ot a new or
edited Program is entered, press
ENTER once more.
This message is displayed brietly (the Pro -
gram is checked tor syntax errors: it any are
tound, they are displayed in normal text),
and then the main menu
appears:
SAVE
Blk: 16 M: 53
PR + 22.3~I
PR+ 17.2~I
WAIT lOms
iO (~s ~L)
Edit PGM
New PGM
Erase PGM
Listof PGM‘s
Pgm
3. Now press the SAVE key:
Now the number ot the axis to which the
Program relatesis requested. ltthe numberat
the top right is correct, press <ENTER>. lt
anotheraxis is required, press the MODE key,
enter the number, and press ENTER.
After a short time, the main menu re-appears.
EDIT
When the main menu is displayed, select the EDIT mode using the MODE key to move the
cursor to EDIT.
Commence the tunction using the ENTER key. Now the Program displayed may be edited.
8/27 — —___ ______ —_____ - ___—__
Lanze
Save to Axis ~%
o.k. = <ENTER>
Axis? = <MODE
>