Lenze SX-1 - 5.3.3 Serial Interface X3 (PT-1 Connection)

5.3.3
5.3~3 Serial Interface X3 (PT-1 Connection)
9 pin D-sub, Female
pin 1 Power Supply to PT-1
pin 2 TXD - (RS 485, RS 422)
pin 3 TXD + (RS 485, RS 422)
pin 4 RXD - (RS 485, RS 422)
pin 5 RXD + (RS 485, RS 422)
pin 6 Not used
pin7 Not used
pin 8 Power Supply to PT-1
pin 9 Signal Ground (RS 485, RS 422)
Lanze
X1I 15 way
D-submale
6
0V SIgnal graund
RxD -
SX-1 /21
nterface
n.c.
TxD-<RS 485)
TxD+ out
n .c.
£0
5 :2
c
0
%,~ •~
6 c
I 20 v AC
Shield connected via
metal cover cl connector
Recommended cable type.
LIYCY 8x0,5 mm2, KA 50508: up te 50 m lengtii
1
Recommended cable type:
cv - HF, 4x2x0,2 mm2; up te 3 m lengil,
5/12