Lenze SX-1 - 8.5 Display and Editing Variable Values

8.5 ___
8.5 Display and Editing Variable Values
After entering Variable values, they are immediately saved to the SX-1 (without pres-
sing SAVE).
Variable values may also be changed whilst the Program is running:
a) by the user
b) trom the Program itselt. A display ot the current values is
possible by pressing the PROGNAR key.
c) by parallel communications link data (Option) with the aid of a PLC or from decade
switches.
(See also Chapter 8.4)
______________________ ___—- 8/33 — ____ ___ ___ ___
Lanze