Lenze SX-1 - 7.2 Parameter Entry and Variable Definition; Parameter Entry Procedure

7.2
7.2 Parameter Entry and Variable Definition
To enter Parameters, proceed as tollows:
1. Connect the PT-l terminal to the SX-1
via communications link X3 (PT-l re -
ceives power from SX-l).
Now the PT-1 is, tor example, in the „Auto -
External“ mode. This is indicated both in the
LCD display, and by the LED (AUTO). The
SX-l LED should also show „A“ for „Auto -
matic-External“ mode.
j~ij;~
1 PT1
AC 220V
PT 1
7/27 — — —____
Lanze