Lenze SX-1 - 8.2.2 Programming Instructions and their meaning; BEG, END, Label, and JMP Instructions

8.2
8.22 Programming lnstructions and their meaning
BEG Hnnnnnn, END Hnnnnnn
Meaning:
Beginning and End ot Main program.
Input: BEG, ENTER, number, ENTER
Number ot the Program H: nnnnnn = 1 ... 999 999
BEG Uww, END Uww
Meaning:
Beginning and End ot Subroutine.
Input: BEG, MODE, ENTER, numbers, ENTER
Number ot Subroutine U: ww = 0 ... 99
Label Lww
Meaning:
Jump destination Label.
A Label may be placed betore any instruction: it becomes part ot that instruction, and it
may not exist alone.
lt is „jumped“ to by the JMP Lww instruction.
NumberofLabelL: ww=0...99
JMP Lww _______
Meaning: Jump to Label Lww (destination).
NumberofLabelL: ww=0...99
When the program reaches this instruction, an unconditional jumpto Label Lww will occur,
and the program continues trom that point.
8/3
Lanze