Lenze SX-1 - Conditional Jump Instructions

____________—- 8.2.2 ________ —
JMP Uww
Meaning: Jump to Subroutine Uww
Number of Subroutines U: ww = 0 ... 99
When the program reaches this instruction, an unconditional jump to Subroutine Sww will
occur, and the Subroutine is executed. When the end ot the Subroutine is reached, the
program is resumed at the instruction tollowing the jump instruction. For example:
PR....
JMPU12—~‘ BEG U12
WAIT
~~~END U12
IF lxxx = H Lww
IF lxxx = L Lww ________ ___________
Meaning:
Jump to Label Lww (Address ww), it input 1 xx
- is either H = HIGH (=1)
-or L=LOW(=O)
Numberotlnputsl: xxx =1.6.16
NumberotLabelL: ww=0...99
IF lxxx = H Uww
IF lxxx = L Uww
Meaning:
Jump to Subroutine Uww, it input 1 xxx
- is either H = HIGH (=1)
-or L=LOW(=O)
Numberotlnputsl: xxx=1...6.16
Number ot Subroutine U: ww = 0 ... 99
8/4 —~________________ ___________
Lenze