Lenze SX-1 - Flag and Counter Jump Instructions

8.2.2 —_____________________ ______
lFFvv=H Lww
lFFvv= LLww
Meaning:
Jump to Label Lww (Address ww), it Flag Fvv
- is eitherH = HIGH (=1)
-or L=LOW(=~I)
Number ot Flag F: vv = 0 ... 99
Number of Label L: ww = 0 ... 99
A number ot Flags are reserved as tollows, and must not be used tor other purposes:
F99=H; Drivein motion
F 98 = H; Linear Acceleration/Sin
2
F 97 = H; Axis Homed
F 96 = H; Touch Probe signal not received
F 95 = H; Touch Probe during Sin2 accel/decel
F 94 = H; External Override Active
lFFvv= H Uww
lFFvv= LUww
Meani ng:
Jump to Subroutine Uww, it Flag Fvv
- is either H = HIGH (=1)
-or L=LOW(=~)
Number ot Flag F: vv = 0 ... 99
Number ot Subroutine U: ww = 0 ... 99
IF Cvv = aaaa Lww
IF Cvv < aaaa Lww
IF Cvv > aaaa Lww
Meaning:Jumpto Label Lww (Addressww), itthevalueof CounterCwis equalto (=), smal -
1er than (<), or greater than (>)the value aaaa.
NumberotLabelL: ww = 0... 99
Number of Counter C: vv = 0 ... 99
Reterence Value: aaaa = - 9999 to .i. 9999
8/5
Lanze