Lenze SX-1 - Page 142

10.
The program could be as tollowing:
BEG MOOOOO1
WAIT 101 = H
VEL % VOO The Velocity is detined by
ACC 100 % Variable VOO.
DEC 100%
PRVO1—
SETOO1 =H
WAIT 101 = H
SETOO1 =L
WAIT 103 = H
JMP LOO
END HOOOOO1
The cut-ott length is detined by
Variable VOl.
The machine operator thus has the ability to change the length ot the sheets and the line
speed with the aid ot a simple „menu“, similar in ettect to a decade switch.
10/2
LOO
Lanze