General information
Leuze electronic BPS 34 3
TNT 35/7-24V
1 General information
1.1 Explanation of symbols
The symbols used in this technical description are explained below.
Attention!
This symbol precedes text messages which must strictly be observed. Failure to observe the
provided instructions could lead to personal injury or damage to equipment.
Attention Laser!
This symbol warns of possible danger through hazardous laser radiation.
Note!
This symbol indicates text passages containing important information.
1.2 Declaration of Conformity
The bar code positioning system BPS 34, the modular connector hood MS 34 103/
MS 34 105, and the optional modular service display MSD 1 101 have been developed and
manufactured in accordance with the applicable European standards and directives.
The devices of the BPS 34 series also fulfill the cUL requirements (Underwriters Laboratory
Inc.) for the USA and Canada.
Note!
A copy of all declarations of conformity available for the product can be found in the appen-
dix of this handbook (see chapter 12.1 "EC Declaration of Conformity" on Page 101).
The manufacturer of the product, Leuze electronic GmbH + Co. KG in D-73277 Owen,
possesses a certified quality assurance system in accordance with ISO 9001.
To Next Page
Loading...