Mounting
38 BPS 34 Leuze electronic
7 Mounting
7.1 Mounting the BPS 34
There are 2 different types of mounting arrangements for the BPS 34:
• Using 4 M4x6 screws on the rear of the device.
• Using the BT 56 mounting device on the fastening grooves.
Figure 7.1:BPS 34 mounting options
BT 56 mounting device
The BT 56 mounting device is available for mounting the BPS 34 using the fastening
grooves. It is designed for rod mounting (Ø 16mm to 20mm). For order guide, please refer
to Chapter 10.6 on Page 95.
Laser-beam exit
window
4x M4 mounting threads on the
rear of the device
15-pin sub-D
connector on the
bottom of the device
Dovetail
fastening grooves
To Next Page
Loading...