Leuze electronic BPS 34 - Detailed Description of the Modules

Device parameters and interfaces
Leuze electronic BPS 34 51
TNT 35/7-24V
8.1.7 Detailed description of the modules
Note!
In the following detailed descriptions of the modules, you will find in the last column of the
tables cross references (CR) to parameters and input/output data of other modules
which are directly related to the described parameter. These cross references must be
observed during configuration.
The individual modules are numbered from 1…27.
The parameters and input/output data within a module are alphanumerically labeled
from … .
Example:
The Static preset value in [mm] parameter in module 3 only becomes active when the
preset teach occurs via module 12 , 7 or 3
.
a
z
a
c
g
b