Package Information
The package information will show the information about the file that you
selected.
Firmware version: The version number of the selected firmware.
Supported script version: The maximum script version that firmware can
support.
Web page version: The version number of the web page.
Script version: Script version used by web page and server script.
Viewer plugin version: The version number of the viewer plugin.
Upgrade plugin version: The version number of the upgrade plugin
Supported language: The language that the selected file supports.
File Selection
You can use the file combolist to browse the file that you want upgrade onto
the selected device(s). After selecting the file, Installation Wizard will check
whether the file you selected is correct. If it is correct, then the package
information will display the information about the file and enable the
“Upgrade” button. Therefore you can click on the button to upgrade the
firmware. If it is not correct, then it will popup a warning message.
Upgrade
Click on the “Upgrade” button to upgrade the firmware of the selected
device(s). It will popup the dialog to show the progress of the upgrading
process.
To Next Page
Loading...
