System parameters
"Keep current date and time" Click on this to reserve the current date and time of
the Network Camera. An internal real-time clock maintains the date and time
even when the power of the system is turned off.
"Sync with computer time" Synchronizes the date and time of the Network
Camera with the local computer. The read-only date and time of the PC is
displayed as updated.
“Manual” Adjust the date and time according to what is entered by the
Administrator. Notice the format in the related fields while doing the entry.
“Automatic” Synchronize with the NTP server over the Internet whenever the
Network Camera starts up. It will fail if the assigned time-server cannot be
reached.
“NTP server” Assign the IP address or domain name of the time-server. Leaving
the text box blank connects the Network Camera to the default time-servers.
"Time zone" Adjust the time with that of the time-servers for local settings.
Remember to click on
to immediately validate the changes. Otherwise,
the correct time will not be synchronized.
To Next Page
Loading...
