Software revision upgrade
Customers can obtain the up-to-date software from the web site. An
easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with
just a few clicks. The upgrade function is opened to the Administrator only. To
upgrade the system, follow the procedures below.
1. Download the firmware file named “FLASH.BIN” from the appropriate
product folder.
2. Run the Upgrade Wizard and proceed following the prompts. Refer to the
instructions of the Upgrade Wizard for details.
3. The whole process will finish in a few minutes and it will automatically
restart the system.
If power fails during the writing process of Flash memory, the program
in the memory of the Network Camera may be destroyed permanently. If
the Network Camera cannot restart properly, ask your dealer for technical
To Next Page
Loading...
