<-5 ~ 5> adjust brightness of image
contrast <-5 ~ 5> adjust contrast of image
hue <-5 ~ 5> adjust hue of image
saturation
<-5 ~ 5> adjust saturation of image
preview <not required> not save the parameters
restore <not required> recall the original settings
save <not required> save the parameters
Application configuration URL
URL: /setup/app.cgi
NAME VALUE DESCRIPTION
emode <not required> Upload snapshot when motion
detected
smode <not required> sequential mode application
mail upload snapshots by email smethod
ftp upload snapshots by FTP
suffix <not required> FTP file with date and time suffix
delay <integer> seconds delay to detect next
event
inter <integer> seconds delay to capture
post-event
motion1 < not required > set motion window1 as trigger
condition
motion2 < not required > set motion window2 as trigger
condition
motion3 < not required > set motion window3 as trigger
condition
sinter <integer> seconds interval for sequential
mode
sbegin <hh:mm:ss> time to start sequential mode
send <hh:mm:ss> time to stop sequential mode
To Next Page
Loading...
