3. Open an FTP client program and connect to the Network Camera. The user
name and password is as same as the Administrator’s.
4. Transfer user.htm in local folder to the Network Camera,
5. Close the FTP program and reload the homepage of the Network Camera,
6. Click on “Configuration” on homepage,
7. Click on “Homepage layout” at the left column,
8. Check “Use the customized homepage”.
9. Click on “Save” button and return to homepage.
* The user.htm only provides plain text content that scripts and URL of
external resources can be used to adorn the homepage. Refer to tutorials of
writing HTML and scripts.
If the customized homepage goes wrong and cannot display, link to the
“Homepage layout” page, “http://<IP address of Network
Camera>/setup/layout.html”, to disable “Use the customized homepage”.
To Next Page
Loading...
