6.3.3.1 Basic
The Basic setting can be found under this path: System> Network> Basic.
Users can choose to connect to the IP Camera with fixed or dynamic (DHCP) IP
address. The IP Camera also provides PPPoE support for users who connect to
the network via PPP over Ethernet (PPPoE).
General
Get IP address automatically (DHCP)
The camera’s default setting is <Use fixed IP address>. Please refer to User’s
Manual for login with the default IP address.
If select <Get IP address automatically>, after the IP Camera restarts, users
can search it through the installer program: DeviceSearch.exe, which can be
found in “DeviceSearch” folder in the supplied CD.
NOTE: Please make the record of the IP Camera’s MAC address, which
can be found in the label of the camera, for identification in the future.
To Next Page
Loading...
