6.3.3.4 UPnP
The UPnP setting can be found under this path: System> Network> UPnP.
UPnP Setting
Enable UPnP
When the UPnP is enabled, whenever the IP Camera is presented to the
LAN, the icon of the connected IP Cameras will appear in My Network
Places to allow for direct access.
NOTE: To enable this function, please make sure the UPnP
component is installed on your computer. Please refer to Install
UPnP components for UPnP component installation procedure.
Enable UPnP port forwarding
When the UPnP port forwarding is enabled, the IP Camera is allowed to
To Next Page
Loading...
