6.3.9 Motion Detection
The Motion Detection setting can be found under this path: System> Motion
Detection.
Motion Detection function allows detecting suspicious motion and triggering
alarms when motion volume in the detected area reaches/exceeds the
determined sensitivity threshold value.
In the Motion Detection setting page, there is a frame (Motion Detection
Window) displayed on the Live View Pane. The Motion Detection Window is for
defining the motion detection area. To change the size of the Motion Detection
Window, move the mouse cursor to the edge of the frame and draw it
outward/inward. Moving the mouse to the center of the frame can shift the frame
to the intended location.
To Next Page
Loading...
