Administrator changes the HTTP port of the IP Camera whose IP address is
192.168.0.100 from 80 to 8080, the user must type in the web browser
“http://192.168.0.100:8080” instead of “http://192.168.0.100”.
RTSP port
The default setting of RTSP Port is 554; the setting range is from 1024 to 65535.
MJPEG over HTTP port
The default setting of MJPEG over HTTP Port is 8008; the setting range is from
1024 to 65535.
HTTPS port
The default setting of HTTPS Port is 443; the setting range is from 1024 to
65535.
NOTE: Be aware to choose the different port from the one set for the
web server port.
With IPv6 support, users can use the corresponding IPv6 address for browsing.
Enable IPv6 by checking the box and click on <Save> to complete the setting.
IPv6 Address Configuration
To Next Page
Loading...
