Enter a comment if you wish.
Enter the user's password in these fields.
These fields are also used to change an existing user's password, as follows:
1. Select the desired user
2. Clear the existing values in the password fields.
3. Enter the desired password in both the "Password" and "Verify Pass-
word" fields. If no password is required, leave both fields blank.
4. Click the "Save" button.
When creating a new user, enter the desired password in both of these fields.
Create
Private Folder
(Share)
If creating a new user:
Checking this option will create a Group and a Private Folder (Share)
with the same name as the user.
Read/Write access will be granted to the Share.
If changing an existing user:
The checkbox has no effect - it will neither create nor delete. This op-
tion is only available when creating a new user.
Enable the checkbox if you want to set the disk usage for the user, and then
enter the maximum amount of disk space this user is allowed to use.
Note! Unless the checkbox is checked, the Disk Quota field has no effect.
Clicking this button will display the Groups of which the selected user is a
member. You can then add this user to other Groups, or remove existing
membership.
Click this button to delete the selected user.
Use this button to clear the form, preparing the form for the entry of a new
user.
Use this button to create a new user, after entering their data in the "User
Properties" fields.
Use this Button to save any changes you have made to the "User Properties"
for an existing user.
Modifying an existing user
To modify the properties for an existing user
Select the desired user from the list. Their details will be displayed in the "User
Properties" fields.
Edit the "User Properties" fields as required. Note that you cannot change the
"Create Private Folder (Share)" option when modifying a user.
To Next Page
Loading...
