LevelOne WAB-7400 - Security; Security > MSSID

34
3.3 Security
3.3.1 Security > MSSID
In this section you may configure the SSID, beacon interval, RTS threshold,
fragmentation threshold, DTIM interval, data rate, security type, and 802.1x. Figure
6.2.1 and Figure 6.2.2 illustrate the MSSID configuration page.
Figure 6.1.1: MSSID configuration page
 Click on the Edit button to modify the default values.
Figure 6.1.2: MSSID configuration page
 ESSID: The SSID is a unique named shared amongst all the points of the
wireless network. The SSID must be identical on all points of the wireless
network and cannot exceed 32 characters.
 Broadcast SSID: Select enable (visible) or disable (invisible). This is the
SSID broadcast feature. When this option is set to Visible, your wireless
network name is broadcast to anyone within the range of your signal. If you're
not using encryption then they could connect to your network. When Invisible