LevelOne WAB-7400 - 3.7.1 Login Setup > RADIUS

58
3.7 Login Setup
3.7.1 Login Setup > RADIUS
Remote Authentication Dial In User Service (RADIUS) is an AAA (Authentication,
Authorization and Accounting) protocol for applications such as network access or IP
mobility. RADIUS client will verify authentication push by RADIUS server. Figure
10.1.1 illustrates the RADIUS client configuration page.
Figure 10.1.1: RADIUS client configuration page
RADIUS client configuration page contains the following parameters :
 Active: Enable or disable RADIUS client.
 NAS ID: Enter the NAS ID.
 Called Station ID: Enter the Called Station ID.
 NAS Port: Enter the NAS Port number.
 NAS Port Type: Enter the NAS Port Type.
 Interim Update Interval: Enter the value of Interim Update Interval.
 “Add” button to add entry to the RADIUS server list.