TKIP (Temporal Key Integrity Protocol) provides per-packet key generation
and is based on WEP. AES (Advanced Encryption Standard) is a very secure
block based encryption. Note that, if the bridge uses the AES option, the
bridge can associate with the access point only if the access point is also set to
use only AES. The device negotiates the cipher type with the access point, and
uses AES when available.
802.1x: This option works with a RADIUS Server to authenticate wireless
clients. Wireless clients should have established the necessary credentials
before attempting to authenticate to the Server through this Gateway.
Furthermore, it may be necessary to configure the RADIUS Server to allow
this Gateway to authenticate users.
Encryption Key: Specify the WPA encryption key.
Click on the Save Changes button to store and changes and then reboot the
device in order for the changes to take effect.
3.2.2 Network > WAN
Figure 5.2.1 illustrates the network configuration page.
Figure 5.2.1: Network configuration page
Network contains the following parameters:
Primary DNS: Primary Domain Name Server used to translates domain
names to IP addresses. Edit this field to match your ISP DNS address or leave
it unchanged to use received DNS address from your ISP.
Secondary DNS: Secondary Domain Name Server used to translates domain
names to IP addresses. A backup DNS address to primary DNS. Specify the
To Next Page
Loading...
