This page also displays the current firmware version and its release date. Figure 9.4.1
illustrates the Firmware upgrade configuration page.
Figure 9.4.1: Firmware configuration page
Ensure that you have downloaded the appropriate firmware from the vendor’s
website.
Click on the Browse button to select the firmware and then click on the
Upload button.
Note: Please do not power off the device during the firmware upgrade as they may
cause permanent damage to the device.
3.6.5 System Management > Trap
Trap used to report an alert or other asynchronous event about managed system.
Figure 9.5.1 illustrates the trap configuration page.
To Next Page
Loading...
