LevelOne WAB-7400 - Tools > Route

61
Figure 11.2.1: Ifconfig page
Ifconfig page contains the following parameters:
 “Ifconfig” button to call ifconfig command.
 “Output” text area to display the output of the command.
3.8.3 Tools > Route
Route page is used to collect information about device’s routing table. Figure 11.3.1
illustrates the route page.
Figure 11.3.1: Route page
Route page contains the following parameters:
 “Route” button to display output of route command.
 “Output” text area display result of the route command.